POM/PTFE LNP™ LUBRICOMP™ KL004
31
- Properties:wear resistant
- Usages:Lighting applicationsElectrical applicationsPlastic bag
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ASTMD570 | 0.15 % | |
| ISO62 | 0.26 % | ||
| Shrinkage rate | ASTMD955 | 2.0to2.5 % | |
| ASTMD955 | 2.0to2.5 % | ||
| ISO294-4 | 2.0to2.5 % | ||
| ISO294-4 | 2.0to2.5 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTMD638 | 2140 Mpa | |
| ISO527-2/1 | 2400 Mpa | ||
| tensile strength | ASTMD638 | 51.1 Mpa | |
| Tensile stress | ISO527-2 | 47.3 Mpa | |
| tensile strength | ASTMD638 | 50.9 Mpa | |
| Tensile stress | ISO527-2 | 46.5 Mpa | |
| elongation | ASTMD638 | 11 % | |
| Tensile strain | ISO527-2 | 10 % | |
| elongation | ASTMD638 | 18 % | |
| Tensile strain | ISO527-2 | 23 % | |
| Flexural modulus | ASTMD790 | 2070 Mpa | |
| ISO178 | 2600 Mpa | ||
| bending strength | ASTMD790 | 75.8 Mpa | |
| Bending stress | ISO178 | 79.3 Mpa | |
| ASTMD3702Modified | 0.29 | ||
| ASTMD3702Modified | 0.15 | ||
| Wear factor - Washer | ASTMD3702Modified | 15.0 10^-10in^5-min/ft-lb-hr |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam gap impact strength 3 | ISO180/1A | 4.0 kJ/m² | |
| UnnotchedIzodImpactStrength3 | ISO180/1U | 45 kJ/m² | |
| Dart impact equipped with measuring instruments | ASTMD3763 | 6.40 J | |
| Multi axis Instrumented Impact Energy | ISO6603-2 | 0.770 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTME831 | 1.1E-04 cm/cm/°C | ||
| ISO11359-2 | 1.1E-04 cm/cm/°C | ||
| ASTMD648 | 157 °C | ||
| ASTMD648 | 99.4 °C | ||
| Hot deformation temperature 4 | ISO75-2/Af | 98.0 °C | |
| ASTME831 | 1.1E-04 cm/cm/°C | ||
| ISO11359-2 | 1.1E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top