
TPE T & T Marketing TPE 5595CR USA T & T
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 | ||
| Extreme Oxygen Index | ASTM D2863 | 28 | % | |
| elastomer | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | 0.762mm | ASTM D412 | 20.0 | MPa |
| elongation | Break,0.762mm | ASTM D412 | 600 | % |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | 0.762mm | ASTM D790 | 359 | MPa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Brittle temperature | ASTM D746 | <-45.6 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792 | 1.34 | g/cm³ | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | 1.91mm | ASTM D257 | 1.6E+16 | ohms·cm |
| Dielectric strength | 1.91mm | ASTM D149 | 26 | kV/mm |
| Dielectric constant | 1.91mm,60Hz | ASTM D150 | 2.40 | |
| Dissipation factor | 1.91mm,60Hz | ASTM D150 | 2.7E-03 | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | ShoreA,0.762mm | ASTM D2240 | 93 | |
| ShoreD,0.762mm | ASTM D2240 | 41 | ||
| aging | Test Condition | Test Method | Test Result | Test Unit |
| Change rate of tensile strength in air | 762.0μm | UL 1581 | >90 | % |
| Elongation retention rate | 762.0μm | UL 1581 | >90 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.