Technical Data Sheet
| Uncured Properties | Test Condition | Test Method | Test Result |
|---|
| Curing Time | | | 24 hr |
| Curing Time | | | 20 min |
| density | | | 0.968 g/cm³ |
| density | | | 1.15 g/cm³ |
| | | 1.5 Pa·s |
| | | 2.0 Pa·s |
| Curing Time | | | 0.66 hr |
| Curing Time | | | 1.5 hr |
| Curing Time | | | 2.5 hr |
| colour | | | Clear/Transparent |
| MixRatiobyWeight(PBW) | | | 100 |
| MixRatiobyWeight(PBW) | | | 25 |
| MixRatiobyVolume(PBV) | | | 4.0 |
| MixRatiobyVolume(PBV) | | | 1.0 |
| Cured Properties | Test Condition | Test Method | Test Result |
|---|
| electric strength | | | 25 kV/mm |
| | | 4.00 |
| Volume resistivity | | | 7.2E+14 ohms·cm |
| Dissipation Factor | | | 0.017 |
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| Thermosetting mixed viscosity | | | 1600 cP |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Operating | | | -30.0到125 °C |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | | >1.0E+15 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | | 2E-04 cm/cm/°C |
| thermal conductivity | | | 0.30 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare