PPO(PPE)+PS+PP Generic PPE+PS+PP

Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	ASTMD792	0.987到1.03 g/cm³
melt mass-flow rate	ASTMD1238	11到16 g/10min
Shrinkage rate	ASTMD955	0.65到1.0 %

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ISO527-2	33.9到44.6 MPa
tensile strength	tensile strength		ASTMD638	27.6到41.5 MPa
elongation		ASTMD638	6.5到15 %
	elongation		ASTMD638	83到200 %
	elongation	elongation		ISO527-2	46到120 %
Flexural modulus		ASTMD790	1340到1560 MPa
bending strength		ASTMD790	49.0到53.2 MPa
Tensile modulus		ASTMD638	1170到1710 MPa
Tensile modulus	Tensile modulus		ISO527-2	1660到1760 MPa
tensile strength		ASTMD638	33.8到43.8 MPa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTMD256	150到590 J/m
Dart impact equipped with measuring instruments		ASTMD3763	36.2到45.9 J

Thermal performance	Test Condition	Test Method	Test Result
		ASTMD648	110到113 °C
			ASTMD648	71.1到92.0 °C
vicat		ASTMD1525	85.0到146 °C
vicat	vicat		ISO306	102到118 °C
		ASTME831	8.1E-5到1.6E-4 cm/cm/°C
			ASTME831	7.2E-5到1.1E-4 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top