PP 3084 FPC NINGBO

Form：Granules | Grade：Injection grade

Properties:

heat-resistingHigh impact resistanceHigh heat resistanceMedium impact strengthComplies with FDA 21 CFR High rigidity

Typical Applications:

Office suppliesAutomotive sectorAutomobile and motorcycle accessoriesElectrical componentsBattery caseOffice supplies

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Office supplies \| Automotive sector \| Automobile and motorcycle accessories \| Electrical components \| Battery case \| Office supplies
Properties:	heat-resisting \| High impact resistance \| High heat resistance \| Medium impact strength \| Complies with FDA 21 CFR \| High rigidity

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ISO 1133	8.5	g/10min
Shrinkage rate		FPC Method	1.3-1.7	%
density		ISO 1183	0.9
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ISO 527	28	Mpa
Elongation at Break		ISO 527	200	%
Rockwell hardness		ISO 2039	105	R
Bending modulus		ISO 178	1373	Mpa
Impact strength of cantilever beam gap	23℃	ISO 180	10	kg.cm/cm
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-20℃	ISO 180	4.5	kg.cm/cm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	ISO 75	130	°C
Vicat softening temperature		ISO 306	155	°C
Combustibility	Natural≥2mm	UL 94	94HB	CLASS

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top