TSC 9M
0
- Properties:Before injecting highly transparent TSC-M materialsthoroughly clean the machine with GPPS (especially if the machine has produced transparent ABStransparent HIPSacrylicSAN materialsetc.) to ensure that there are no residual materials in the barrel that affect the highest transparency of TSC-M
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.07 | |
| hardness | 83 Shore D |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| IZOD impact strength | ASTM D-256 | 2.5 Kg.cm/cm | |
| bending strength | ASTM D-790 | 82 MPa | |
| Tensile strength | ASTM D-638 | 57 MPa | |
| Flexural modulus | ASTM D-790 | 2800 MPa | |
| ASTM D-638 | 5 % |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| transmittance | ASTM D-1003 | 92% 1/8" | |
| Haze ratio | ASTM D-1003 | 0.8 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 3.5 g/10min | |
| ASTM D-648 | 90 ℃ | ||
| softening point | ASTM D-1525 | 103 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top