AES HW600G KUMHO KOREA
816
- Properties:High rigidityProcessabilityWeather resistanceHigh toughness
- Usages:Automotive sectorAutomotive External PartsAutomotive External PartsApplication in the automo
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Melt mass flow rate | 220°C/10.0kg | ASTMD1238 | 17 | g/10min |
| 220°C/10.0kg | ISO1133 | 24 | g/10min | |
| Shrinkage rate | MD | ASTMD955 | 0.40到0.70 | % |
| -- | ISO294-4 | 0.40到0.70 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| tensile strength | -- | ASTMD638 | 52.0 | Mpa |
| -- | ISO527-2/50 | 47.0 | Mpa | |
| elongation | 断裂 | ASTMD638 | 22 | % |
| 断裂 | ISO527-2/50 | 25 | % | |
| Bending modulus | -- | ASTMD790 | 2200 | Mpa |
| --2 | ISO178 | 2300 | Mpa | |
| bending strength | -- | ASTMD790 | 72.0 | Mpa |
| --2 | ISO178 | 65.0 | Mpa | |
| Impact strength of simply supported beam gap | -30°C | ISO179 | 7.0 | kJ/m² |
| 23°C | ISO179 | 15 | kJ/m² | |
| Simply supported beam without notch impact strength | 23°C | ISO179 | 60 | kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 1.8MPa,未退火 | ASTMD648 | 85.0 | °C |
| 1.8MPa,未退火5 | ISO75-2/A | 78.0 | °C | |
| vicat softening point | -- | ASTMD15256 | 95.0 | °C |
| -- | ISO306/B50 | 96.0 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Surface resistivity | IEC60093 | >1.0E+15 | ohms | |
| Volume resistivity | IEC60093 | >1.0E+15 | ohms·cm |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | UL94 | HB |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top