POM Copolymer LUVOCOM® 80-8883

Properties:
Filler
Lehmann
Germany
Usages:
Applications in the automotive industry
cams
business equipment
engineering accessories
textile applications
Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	ISO1183	1.44 g/cm³
Shrinkage rate	DIN16901	1.8到2.5 %
Water absorption rate		<0.10 %

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO527-2	3300 MPa
Tensile stress	Break	ISO527-2	56.0 MPa
Tensile strain	Yield	ISO527-2	9.0 %
Flexural modulus		ISO178	2000 MPa
Bending Strain		ISO178	12 %
Bending stress		ISO178	60.0 MPa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO179/1fU	58 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		IEC60093	>1.0E+12 ohms
insulation resistance		IEC60167	>1.0E+12 ohms

Thermal performance	Test Method	Test Result
vicat	ISO306/A	160 °C
Heat distortion temperature	ISO75-2/A	105 °C
Continuous use temperature	UL746B	100 °C
Maximum operating temperature - SharrTerm		120 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top