PET RTP 1105 BLK
0
- Properties:Fillerglass fiber reinforced material30%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.56 g/cm³ | |
| Shrinkage rate | ASTM D955 | 0.10to0.30 % | |
| water content | 0.010 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Primary Additive | 30 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | Yield | ASTM D638 | 3.0to5.0 % |
| Flexural modulus | ASTM D790 | 9650 MPa | |
| bending strength | ASTM D790 | 221 MPa | |
| Tensile modulus | ASTM D638 | 11000 MPa | |
| tensile strength | ASTM D638 | 152 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 80 J/m | |
| Suspended wall beam without notch impact strength | ASTM D4812 | 640 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 224 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top