POM Iupital™ F40-03 E9030
51
- Properties:High mobilityThermal stability
- Usages:Thin walled components
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| processability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| process temperature | 170 °C | ||
| 190 °C | |||
| 180 °C | |||
| 180-210 °C | |||
| screw speed | 80-120 rpm | ||
| Temperature | 60-80 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638/ISO 527 | 2900 kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | ASTM D790/ISO 178 | 2700 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 91 kg/cm²(MPa)[Lb/in²] | |
| elongation at break | ASTM D638/ISO 527 | 20 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTM D257/IEC 60093 | 1.E+16 Ω | |
| dielectric constant | ASTM D150/IEC 60250 | 3.9 | |
| arc resistance | ASTM D495/IEC 60112 | 600 | |
| Volume resistivity | ASTM D257/IEC 60093 | 1.E+12 Ω.cm |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.41 | |
| Shrinkage rate | ASTM D955 | 2.0 % | |
| Water absorption rate | ASTM D570/ISO 62 | 0.22 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Combustibility (rate) | UL 94 | HB | |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 1.1E-04 mm/mm.℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top