PC+PET Infino AE-2130

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTM D792	1.23 g/cm³
density	density		ISO 1183	1.23 g/cm³
melt mass-flow rate		ASTM D1238	2.8 g/10min
	melt mass-flow rate		ASTM D1238	21 g/10min
		melt mass-flow rate		ISO 1133	2.8 g/10min
		melt mass-flow rate	melt mass-flow rate		ISO 1133	21 g/10min
Shrinkage rate		ASTM D955	0.30to0.50 %
	Shrinkage rate		ASTM D955	0.30to0.50 %
		Shrinkage rate		ISO 2577	0.30to0.50 %
		Shrinkage rate	Shrinkage rate		ISO 2577	0.30to0.50 %
ash content		ISO 3451	4.0 %
ash content	ash content		ASTM D5630	4.0 %

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	R-Scale	ASTM D785	111
Rockwell hardness	Rockwell hardness	R-Scale	ISO 2039-2	111

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ISO 180/1A	38 kJ/m²
Charpy Notched Impact Strength		ISO 179/1eA	33 kJ/m²
Impact strength of cantilever beam gap		ASTM D256	550 J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D256	180 J/m

Mechanical properties	Test Condition	Test Method	Test Result
bending strength		ASTM D790	81.0 MPa
bending strength	bending strength		ISO 178	82.0 MPa
Tensile modulus		ASTM D638	2300 MPa
Tensile modulus	Tensile modulus		ISO 527-2/50	2400 MPa
tensile strength	Yield	ASTM D638	57.0 MPa
	tensile strength	Yield	ISO 527-2/50	56.0 MPa
		tensile strength	Break	ASTM D638	56.0 MPa
		tensile strength	tensile strength	Break	ISO 527-2/50	55.0 MPa
elongation	Break	ASTM D638	90 %
Tensile strain	Break	ISO 527-2/50	90 %
Flexural modulus		ASTM D790	2500 MPa
Flexural modulus	Flexural modulus		ISO 178	2400 MPa

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	128 °C
	Heat distortion temperature		ISO 75-2/B	120 °C
		Heat distortion temperature		ISO 75-2/B	125 °C
			Heat distortion temperature		ASTM D648	108 °C
				Heat distortion temperature		ISO 75-2/A	98.0 °C
				Heat distortion temperature	Heat distortion temperature		ISO 75-2/A	112 °C
vicat		ISO 306/B50	132 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top