LDPE DNDV0405 UNICAR JAPAN

Form：Granules | Grade：Injection grade

Properties:

Moderate stiffnessHigh glossHigh mobility

Typical Applications:

packingcover

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	packing \| cover
Properties:	Moderate stiffness \| High gloss \| High mobility

Certificates

No Data...

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
characteristic			流动性和成型性好.成型周期短.光泽好.耐药品性好.中等刚性
Color			透明
purpose			用作塑料花和密封容器的盖子
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density			0.915
melt mass-flow rate			32
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Elongation at Break		ASTM D638/ISO 527	500	%
tensile strength		ASTM D638/ISO 527	100	kg/cm²(MPa)[Lb/in²]
elongation		ASTM D638/ISO 527	500	%
Rockwell hardness		ASTM D785	70
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	ASTM D648/ISO 75	102	℃（℉）
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792/ISO 1183	0.915
Shrinkage rate		ASTM D955	0.4	%
melt mass-flow rate		ASTM D1238/ISO 1133	32	g/10min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top