PP 1101S
0
- Properties:Fiber grade
- Usages:High speed spinning of low denier synthetic fibers
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | GB/T 3682-2000 | 24.1 g/10min | |
| isotactic index | GB/T 2412-2008 | 98.6 % | |
| Granular ash content (mass fraction) | GB/T 9345.1-2008 | 195 mg/kg |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile yield stress | GB/T 1040.2-2006 | 34.7 MPa | |
| Tensile modulus of elasticity | GB/T 1040.2-2006 | 1570 MPa | |
| Tensile fracture stress | GB/T 1040.2-2006 | 23.1 MPa | |
| Tensile fracture nominal strain | GB/T 1040.2-2006 | 390 % | |
| Impact of simply supported beam gap（ | GB/T 1043.1-2008 | 2.9 kJ/m2 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| yellow index | HG/T 3862-2006 | -1.3 | |
| fish eye | GB/T 6595-1986 | 0 个/1520㎡ | |
| 1 | 个/1520㎡ |
| Particle appearance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| salad | SH/T 1541-2006 | 0 个/kg | |
| black kernel | SH/T 1541-2006 | 0 个/kg | |
| Large and small particles | SH/T 1541-2006 | 1.3 g/kg | |
| SH/T 1541-2006 | 29 个/kg |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top