PA66 AFG30-FN00N1 ZIG SHENG TAIWAN

Form：Granules | Grade：Injection grade

Properties:

High rigidityGlass fiber reinforced30% fiberglassLiuliang type

Typical Applications:

Shellsporting goodsmechanicalEngine partsPneumatic hand tools gear mechanical partsSports equipmentMotor casingMechanical parts that require high rigidity

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Shell \| sporting goods \| mechanical \| Engine parts \| Pneumatic hand tools \| gear mechanical parts \| Sports equipment \| Motor casing \| Mechanical parts that require high rigidity
Properties:	High rigidity \| Glass fiber reinforced \| 30% fiberglass \| Liuliang type

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
ash content			30	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		ASTM D790	8150	Mpa
bending strength		ASTM D790	255	Mpa
elongation		ASTM D638	3.0	%
tensile strength		ASTM D638	178	Mpa
Impact strength of cantilever beam gap		ASTM D256	120	J/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	ASTM D648	255	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D1238	65	g/10min
density		ASTM D792	1.35

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top