impact performance	Test Condition	Test Method	Test Result	Test Unit
Suspended wall beam without notch impact strength	1/8 "	ASTM D256	8.8	kg-cm/cm
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	V-0	无
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ASTM D638	1350	Kgf/cm2
elongation		ASTM D638	2.5	%
bending strength		ASTM D790	1850	Mpa
Bending modulus		ASTM D790	90000	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		DSC	224	°C
Hot deformation temperature	18.6Kg/cm2	ASTM D648	210	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D1238	23	g/10 min
Shrinkage rate	成形,Flow,3 mm t	GB/T 1040-1992	0.2-0.3	%
Shrinkage rate	Shrinkage rate	成形,横方向,3 mm t	GB/T 1040-1992	0.2-0.3	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257	10*16	ohms·cm
Dielectric strength		ASTM D149	20	KV/mm
Dielectric constant	10^6Hz	ASTM D150	3	无
Dielectric loss	10^6Hz	ASTM D150	0.01	无
Arc resistance		ASTM D495	70	sec
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	120	无

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top