TPEE 4069 DUPONT USA

Form：Granules | Grade：Injection grade

Properties:

UV resistanceThermal stability

Typical Applications:

Automotive ApplicationsElectrical applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive Applications \| Electrical applications
Properties:	UV resistance \| Thermal stability

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Thickness grade		UL 94	HB
Thickness testing		UL 94	1.56	mm
density		ASTM D-792	1.11
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	2.16kg at 220C	ASTM D-1238	8.5	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Elongation at Break		ASTM D412/ISO 527	700	%
tensile strength		ASTM D412/ISO 527	95	kg/cm²(MPa)[Lb/in²]
Rockwell hardness		ASTM D785	40
tear strength		ASTM D624/ISO 34	95	kN/m
Bending modulus		ASTM D790/ISO 178	134	kg/cm²(MPa)[Lb/in²]
Poisson's ratio		ASTM E-132	0.45
Bending modulus	-40C(-40F)	ASTM D-790 IB	172(25)	MPa（kpsi）
Bending modulus	Bending modulus	100C(212F)	ASTM D-790 IB	28(4.1)	MPa（kpsi）
Shore hardness		ASTM D-2240	40
Impact strength of cantilever beam gap	23C(73F),6.35mm(0.25in)	ASTM D-256-A	NB	J/m(ft lb/in)
tear strength		ASTM D-1004	95(550)	KN/m(lb/in)
elongation	Break	ASTM D-638	700	%
tensile strength	张力 10%	ASTM D-638	3.5(0.5)	MPa（kpsi）
Impact strength of cantilever beam gap	-40C(-40F),6.35mm(0.25in)	ASTM D-256-A	NB	J/m(ft lb/in)
tensile strength	张力 5%	ASTM D-638	2.4(0.4)	MPa（kpsi）
tensile strength	tensile strength	Break	ASTM D-638	20(2.9)	MPa（kpsi）
Bending modulus	23C(73F)	ASTM D-790 IB	55(8.0)	MPa（kpsi）
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature			193	℃（℉）
Vicat softening temperature		ASTM D1525/ISO R306	134	℃（℉）
Hot deformation temperature	0.45MPa(66psi)	ASTM D-648	55(131)	℃(°F)
Vicat softening temperature		ASTM D-1525-B	134(273)	℃(°F)
Melting temperature		ASTM D-3418	193(379)	℃(°F)
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D955	1.11	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top