PCTA Eastar™ Z6002 EASTMAN USA
553
- Properties:transparentHigh mobilityImpact strength higher thK glueThere are high requiremen
- Usages:Food service sectorSuitable for products with thick adhesive position
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 0.002-0.006 in/in | |
| density | ASTM D-792 | 1.2 g/cm | |
| Haze ratio | ASTM D-1003 | 0.3 % | |
| transmittance | ASTM D-1003 | 91 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 15 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | ASTM D-638 | 6900/7400 psi | |
| elongation at break | ASTM D-638 | 5/300 % | |
| Impact strength of cantilever beam gap | ASTM D-256 | 1.5/0.7 ft-lb/in | |
| Rockwell hardness | ASTM D-785 | 103 R | |
| Flexural modulus | ASTM D-790 | 2.9×105 psi | |
| tensile strength | ASTM D-790 | 10000 psi |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| intrinsic viscosity | 0.72 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 75 °C | |
| vicat | ASTM D-1525 | 85 °C | |
| combustibility | UL 94 | V-2 | |
| Heat distortion temperature | ASTM D-648 | 65 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top