PP 5003 FPC NINGBO

125

Form：Granules | Grade：Injection grade

Properties:

Low temperature resistanc

Typical Applications:

PPR tubePPR pipesDrinking water pipes for buildingsVacuum forming plateBlown molding

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	PPR tube \| PPR pipes \| Drinking water pipes for buildings \| Vacuum forming plate \| Blown molding
Properties:	Low temperature resistanc

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	0.9	g/cm³
Shrinkage rate		FPC Method	1.3-1.7	%
melt mass-flow rate		ISO 1133	0.27	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	-20℃	ISO 180	6	kg.cm/cm
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23℃	ISO 180	40	kg.cm/cm
Bending modulus		ISO 178	785	Mpa
Rockwell hardness		ISO 2039	90	R
Elongation at Break		ISO 527	500	%
tensile strength	Yield	ISO 527	25	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		DSC	142	°C
Vicat softening temperature		ISO 306	128	°C
Hot deformation temperature	HDT	ISO 75	85	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top