
PC LV-2250Z TEIJIN JAPAN
109
Form:Granules | Grade:Injection grade
Properties:
UV resistancetransparentMedium viscosity
Typical Applications:
transparentTranslucent accessoriesElectrical fieldElectronic fieldElectrical appliancesLighting installation
Product Description
Certificates(1)
Datasheet
Product Description
| Typical Applications: | transparent | Translucent accessories | Electrical field | Electronic field | Electrical appliances | Lighting installation |
| Properties: | UV resistance | transparent | Medium viscosity |
Certificates

Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Refractive index | ASTM D542/ISO 489 | 1.585 | ||
| Transmittance rate | ASTM D1003/ISO 13468 | 88 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | ASTM D790/ISO 178 | /93 | kg/cm²(MPa)[Lb/in²] | |
| Bending modulus | ASTM D790/ISO 178 | /2350 | kg/cm²(MPa)[Lb/in²] | |
| elongation | ASTM D638/ISO 527 | /6 | % | |
| tensile strength | ASTM D638/ISO 527 | /61 | kg/cm²(MPa)[Lb/in²] | |
| Tensile modulus | ASTM D638/ISO 527 | /2400 | kg/cm²(MPa)[Lb/in²] | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 0.7 | mm/mm.℃ | |
| Vicat softening temperature | ASTM D1525/ISO R306 | 149 | ℃(℉) | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | ASTM D570/ISO 62 | 0.2 | % | |
| Shrinkage rate | ASTM D955 | 0.5-0.7 | % | |
| density | ASTM D792/ISO 1183 | /1200 | ||
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric constant | ASTM D150/IEC 60250 | 3 | ||
| ASTM D150/IEC 60250 | 3.1 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.