POM Homopolymer Polipom 20D Poliblend S.p.a.

Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	ISO 1183	1.42 g/cm³
melt mass-flow rate	ISO 1133	2.0 g/10min
Shrinkage rate		1.8to2.2 %
Water absorption rate	ISO 62	0.20 %

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength	Yield	ISO 527-2	65.0 MPa
Tensile strain	Yield	ISO 527-2	8.0 %
Tensile strain	Tensile strain	Break	ISO 527-2	80 %
Tensile modulus		ISO 527-2	3000 MPa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ISO 180/A	60 kJ/m²
Suspended wall beam without notch impact strength		ISO 180	无断裂

Electrical performance	Test Condition	Test Method	Test Result
Compared to the Leakage Tracking Index (CTI)		IEC 60112	PLC 0

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75-2/B	165 °C
	Heat distortion temperature		ISO 75-2/A	110 °C
	Heat distortion temperature	Heat distortion temperature			80.0 °C
vicat		ISO 306/A120	165 °C
ball-indentation hardness		IEC 60695-10-2	通过
melting temperature		DSC	175 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top