EHMWPE Plaslube® PE 4000 LE Techmer Polymer Modifiers
0
- Properties:physical property
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| density | ASTM D792 | 0.941 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 4.0 g/10min | |
| Shrinkage rate | ASTM D955 | 2.2 % | |
| Water absorption rate | ASTM D570 | 0.070 % | |
| tensile strength | Break | ASTM D638 | 32.4 MPa |
| elongation | Break | ASTM D638 | 80 % |
| Flexural modulus | ASTM D790 | 896 MPa | |
| bending strength | ASTM D790 | 48.3 MPa | |
| coefficient of friction | Steel - Dynamic | ASTM D1894 | 0.27 |
| limiting pv value | ASTM D3702 | 5000 psi·fpm | |
| ASTM D3702 | 2500 psi·fpm | ||
| coefficient of friction | ASTM D1894 | 0.19 | |
| ASTM D1894 | 120 10^-8mm³/N·m | ||
| Impact strength of cantilever beam gap | ASTM D256 | NoBreak | |
| Rockwell hardness | R-Scale | ASTM D785 | 66 |
| Heat distortion temperature | ASTM D648 | 93.3 °C | |
| ASTM D648 | 54.4 °C | ||
| Linear coefficient of thermal expansion | ASTM D696 | 9.5E-05 cm/cm/°C | |
| Volume resistivity | ASTM D257 | 1E+15 ohms·cm | |
| limiting pv value | ASTM D3702 | 3000 psi·fpm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top