PPS 1140A1 JAPAN POLYPLASTIC

Form：Granules | Grade：Injection grade

Properties:

High toughnessHigh temperature resistanFlame retardantGlass fiber reinforced

Typical Applications:

Fiber grade

Supplier(1)

Product Description

Certificates(2)

Datasheet

Product Description

Typical Applications:	Fiber grade
Properties:	High toughness \| High temperature resistan \| Flame retardant \| Glass fiber reinforced

Certificates

SGS

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
characteristic			高韧性
Color			黑色/本色
purpose			汽车配件/电子电器
machinability	Test Condition	Test Method	Test Result	Test Unit
Dry conditions			160℃3H
Processing temperature			290-300	°C
	Processing temperature			310	°C
		Processing temperature			300	°C
		Processing temperature	Processing temperature			310-320	°C
Mold temperature			150	°C
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ASTM D638/ISO 527	185	kg/cm²(MPa)[Lb/in²]
Bending modulus		ASTM D790/ISO 178	13000	kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	260	kg/cm²(MPa)[Lb/in²]
Elongation at Break		ASTM D638/ISO 527	1.8	%
tensile strength		ISO 527-2	185	Mpa
Tensile strain	Break	ISO 527-2	1.8	%
Bending modulus		ISO 178	1300	Mpa
bending strength		ISO 178	260	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Combustibility (rate)		UL 94	V-0
Linear coefficient of thermal expansion		ASTM D696/ISO 11359	-	mm/mm.℃
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	265	°C
Linear coefficient of thermal expansion	MD	Internal Method	1E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	Internal Method	4E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792/ISO 1183	1.66
Water absorption rate		ASTM D570/ISO 62	0.01	%
Water absorption rate	Water absorption rate	23°C,24hr	ISO 62	0.030	%
Melt viscosity	310°C,1000sec^-1	ISO 11443	380000	mPa·s
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257/IEC 60093	1.0 x 10^16	Ω.cm
Volume resistivity	Volume resistivity		IEC 60093	1E+16	ohms·cm
Dielectric strength	3.00mm	IEC 60243-1	15	KV/mm
Relative permittivity	1kHz	IEC 60250	4.60
Relative permittivity	Relative permittivity	1MHz	IEC 60250	4.60
Dissipation factor	1kHz	IEC 60250	2E-03
	Dissipation factor	1MHz	IEC 60250	2E-03
	Dissipation factor	Dissipation factor	耐电弧性	IEC 60250	120	sec
Compared to the anti leakage trace index		IEC 60112		V
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	M-Scale	ISO 2039-2	105
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
ColourNumber			HF2000/HD9050

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top