Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D1238 | 4.3 g/10min |
| density | | ASTM D1505 | 0.905 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 103 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | | 120 °C |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTM D256 | 1300 J/m |
| Impact strength of cantilever beam gap | | ASTM D256A | 32 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D638 | 1380 Mpa |
| tensile strength | | ASTM D638 | 33.1 Mpa |
| elongation | | ASTM D638 | 12 % |
| Flexural modulus | | ASTM D790 | 1240 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 121 °C |
| melting temperature | | DSC | 166 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices