TSE Polidiemme® G/450

0
  • Usages:
    Low voltage insulation
    cable sheath
    wire and cable applications

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
densityASTM D7920.870 g/cm³
melt mass-flow rate内部方法1.1 g/10min
Water absorption rateIEC 608110.420 mg/cm²
Water absorption rateIEC 608110.660 mg/cm²
hardnessTest ConditionTest MethodTest Result
Shore hardnessISO 86816
Mechanical propertiesTest ConditionTest MethodTest Result
tensile strength BreakIEC 608117.70 MPa
elongationBreakIEC 60811400 %
agingTest ConditionTest MethodTest Result
Changes in mechanical properties after hot air aging testIEC 6081120 %
Changes in mechanical properties after hot air aging testIEC 6081112 %
Changes in mechanical properties after hot air aging testIEC 6081110 %
Changes in mechanical properties after hot air aging testIEC 60811-16 %
Electrical performanceTest ConditionTest MethodTest Result
Volume resistivityIEC 605024.1E+15 ohms·cm
dielectric strengthASTM D14928 kV/mm
dielectric constantASTM D1502.30
Dissipation FactorASTM D1501.1E-03
dielectric constantIEC 6050215000 Mohms·km
dielectric constantIEC 60502500 Mohms·km
Volume resistivityIEC 605021.4E+14 ohms·cm
Thermal performanceTest ConditionTest MethodTest Result
Hot pressing test - maximum deformation, KIEC 60811<50 %
Flexural modulusIEC 60811无开裂
thermosettingIEC 608110.0 %
thermosettingIEC 6081140 %
thermosettingIEC 608110.0 %
thermosettingIEC 6081150 %
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top