ASA+PA ASA/PA 220 TM-Z2
0
- Properties:Mechanical properties
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 1700 MPa | |
| tensile strength | ISO 527-2/50 | 45.0 MPa | |
| Tensile strain | ISO 527-2/50 | 3.8 % | |
| Charpy Notched Impact Strength | ISO 179/1eA | 30 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 | |
| density | ISO 1183 | 1.08 g/cm³ | |
| Melt volume flow rate | ISO 1133 | 30.0 cm³/10min | |
| Heat distortion temperature | ISO 75-2/B | 105 °C | |
| vicat | ISO 306/B50 | 135 °C | |
| Volume resistivity | IEC 60093 | 1E+13 ohms·cm | |
| relative permittivity | IEC 60250 | 2.90 | |
| Dissipation Factor | IEC 60250 | 0.015 | |
| Water absorption rate | ISO 62 | 5.0 % | |
| ISO 62 | 2.0 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top