DAP Cosmic DAP K66/6230F Cosmic Plastics, Inc.

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap			160to320	J/m
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	3.2mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
compressive strength			165to207	MPa
bending strength			89.6to117	MPa
tensile strength			41.4to68.9	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT		260	°C
Linear coefficient of thermal expansion	MD：-40to100°C		2.4E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium,50°C		0.25	%
dimensional stability			<0.010	%
Shrinkage rate	MD		0.10to0.40	%
Shrinkage rate	Shrinkage rate			6.0
density			1.82	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength	Dry		19	kV/mm
Dielectric strength	Dielectric strength	Wet		16	kV/mm
Dielectric constant	1kHz6		4.00
	Dielectric constant	1kHz7		4.10
	Dielectric constant	Dielectric constant	1MHz6		3.80
Volume resistivity	--4		3E+10	ohms·cm
Volume resistivity	Volume resistivity	--3		>1.0E+16	ohms·cm
Surface resistivity	--4		5E+10	ohms
Dielectric strength	Wet		60000	V
Dielectric strength	Dielectric strength	Dry		64000	V
Dissipation factor	耐电弧性		180	sec
	Dissipation factor	1MHz7		0.013
		Dissipation factor	1MHz6		0.012
			Dissipation factor	1kHz7		9E-03
			Dissipation factor	Dissipation factor	1kHz6		8E-03
Dielectric constant	1MHz7		3.90
Surface resistivity	--3		>1.0E+16	ohms

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top