
PC/ABS C6600-WH SABIC INNOVATIVE US
111
Form:Granules | Grade:Injection grade
Properties:
heat-resisting
Typical Applications:
Automotive sectorHome appliance componentsElectrical fieldElectronic field
Product Description
Certificates(1)
Datasheet
Product Description
| Typical Applications: | Automotive sector | Home appliance components | Electrical field | Electronic field |
| Properties: | heat-resisting |
Certificates

Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 51.0 | J |
| -30°C,TotalEnergy | ASTM D3763 | 51.0 | J | |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 0.75mm | UL 94 | V-2 | |
| 1.5mm | UL 94 | V-0 | ||
| 2.0mm | UL 94 | 5VB | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| elongation | Break | ASTM D638 | 80 | % |
| Yield | ASTM D638 | 4.0 | % | |
| tensile strength | Break | ASTM D638 | 49.0 | Mpa |
| Yield | ASTM D638 | 63.0 | Mpa | |
| bending strength | Yield,50.0mmSpan | ASTM D790 | 94.0 | Mpa |
| Bending modulus | 50.0mmSpan | ASTM D790 | 2620 | Mpa |
| Tensile modulus | ASTM D638 | 3000 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| RTI Elec | UL 746 | 80.0 | °C | |
| Vicat softening temperature | ASTM D15255 | 99.0 | °C | |
| Hot deformation temperature | 1.8MPa,Unannealed,6.40mm | ASTM D648 | 90.0 | °C |
| 1.8MPa,Unannealed,3.20mm | ASTM D648 | 83.0 | °C | |
| 0.45MPa,Unannealed,6.40mm | ASTM D648 | 98.0 | °C | |
| RTI Str | UL 746 | 80.0 | °C | |
| RTI Imp | UL 746 | 70.0 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 260°C/2.16kg | ASTM D1238 | 22 | g/10min |
| Water absorption rate | 24hr | ASTM D570 | 0.11 | % |
| Shrinkage rate | MD:3.20mm | Internal Method | 0.40-0.60 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Relative permittivity | 1MHz | IEC 60250 | 2.70 | |
| Dissipation factor | 50Hz | IEC 60250 | 4E-03 | |
| 60Hz | IEC 60250 | 4E-03 | ||
| Relative permittivity | 60Hz | IEC 60250 | 2.70 | |
| 50Hz | IEC 60250 | 2.70 | ||
| Dielectric strength | 3.20mm,in Oil | IEC 60243-1 | 17 | KV/mm |
| Volume resistivity | IEC 60093 | >1.0E+15 | ohms·cm | |
| Surface resistivity | IEC 60093 | >1.0E+15 | ohms | |
| Dissipation factor | 1MHz | IEC 60250 | 6E-03 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.