PBT G30 JIANGSU SANFAME

Form：Granules | Grade：Injection grade

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23℃，50%RH	ASTM D-570	0.10	%
density		ASTM D-792	1.60	g/cm³
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ASTM D-638	115	Mpa
bending strength		ASTM D-790	185	Mpa
Bending modulus		ASTM D-790	9000	Mpa
elongation		ASTM D-638	2	%
Impact strength of cantilever beam gap	Unnotched	ASTM D-256	450	J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	Notched	ASTM D-256	70	J/m
bending strength		ASTM D790/ISO 178	185	kg/cm²(MPa)[Lb/in²]
Bending modulus		ASTM D790/ISO 178	9000	kg/cm²(MPa)[Lb/in²]
tensile strength		ASTM D638/ISO 527	115	kg/cm²(MPa)[Lb/in²]
Elongation at Break		ASTM D638/ISO 527	2	%
Charpy Notched Impact Strength		ASTM D256/ISO 179	70	kg·cm/cm(J/M)ft·lb/in
Charpy Notched Impact Strength	Charpy Notched Impact Strength		ASTM D256/ISO 179	450	kg·cm/cm(J/M)ft·lb/in
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Combustibility	1/16"	UL 94	V-0
Hot deformation temperature	1.82MPa	ASTM D-648	205	°C
	Hot deformation temperature	0.46MPa	ASTM D-648	220	°C
		Hot deformation temperature	HDT	ASTM D648/ISO 75	205	℃（℉）
		Hot deformation temperature	Hot deformation temperature	HDT	ASTM D648/ISO 75	220	℃（℉）
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ASTM D-955	0.4-1.1	%
Shrinkage rate	Shrinkage rate		ASTM D955	0.4-1.1	%
density		ASTM D792/ISO 1183	1.60
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	106Hz	ASTM D-150	3.5
Volume resistivity		ASTM D-257	1016	Ω.cm
Dielectric strength		ASTM D-149	21	KV/mm
Dielectric loss	106Hz	ASTM D-150	0.02
Volume resistivity		ASTM D257/IEC 60093	1016	Ω.cm
Dielectric constant		ASTM D150/IEC 60250	3.5

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top