Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us
Home
Plastic Datasheets
PPS+PPE

PPS+PPE NORYL™ APS130 resin SABIC

0

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
densityASTM D7921.44 g/cm³
melt mass-flow rateASTM D123829 g/10min
Shrinkage rate内部方法0.25to0.70 %
Water absorption rateASTM D5700.020 %
densityASTM D7921.44 g/cm³
melt mass-flow rateASTM D123829 g/10min
Shrinkage rate内部方法0.25to0.70 %
Water absorption rateASTM D5700.020 %
Mechanical propertiesTest ConditionTest MethodTest Result
tensile strength Yield内部方法113 MPa
elongationBreak内部方法8.0 %
elongationBreak内部方法8.0 %
Flexural modulusASTM D7908430 MPa
bending strengthASTM D790157 MPa
Flexural modulusASTM D7908430 MPa
bending strengthASTM D790157 MPa
tensile strength Yield内部方法113 MPa
Impact resistanceTest ConditionTest MethodTest Result
Impact strength of cantilever beam gapASTM D25688 J/m
Impact strength of cantilever beam gapASTM D25688 J/m
Electrical performanceTest ConditionTest MethodTest Result
Surface ResistivityASTM D2571E+16 ohms
dielectric strengthASTM D14922 kV/mm
dielectric constantASTM D1503.30
dielectric constantASTM D1503.30
Surface ResistivityASTM D2571E+16 ohms
dielectric strengthASTM D14922 kV/mm
dielectric constantASTM D1503.30
dielectric constantASTM D1503.30
Thermal performanceTest ConditionTest MethodTest Result
Heat distortion temperatureASTM D648267 °C
Heat distortion temperatureASTM D648267 °C
Linear coefficient of thermal expansionASTME8312.5E-5到5.5E-5 cm/cm/°C
Linear coefficient of thermal expansionASTME8312.5E-5到5.5E-5 cm/cm/°C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top