XLPE Polidan® EC/110
0
- Properties:aging
- Usages:Low voltage insulationwire and cable applications
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Changes in mechanical properties after hot air aging test | IEC 60811 | 15 % | |
| IEC 60811 | -8 % | ||
| thermosetting | IEC 60811 | 0.0 % | |
| IEC 60811 | <70 % | ||
| Hot air contraction | IEC 60811 | <4.0 % | |
| Volume resistivity | IEC 60502 | 4.1E+15 ohms·cm | |
| density | ASTM D792 | 0.918 g/cm³ | |
| melt mass-flow rate | 内部方法 | 0.70 g/10min | |
| Water absorption rate | IEC 60811 | <0.500 mg/cm² | |
| IEC 60811 | <0.500 mg/cm² | ||
| Shore hardness | ISO 868 | 51 | |
| tensile strength | Break | IEC 60811 | 21.6 MPa |
| Bending test variation - in air, | IEC 60811 | 无开裂 | |
| Volume resistivity | IEC 60502 | 2.7E+15 ohms·cm | |
| dielectric strength | ASTM D149 | 34 kV/mm | |
| dielectric constant | ASTM D150 | 2.30 | |
| Dissipation Factor | ASTM D150 | 6E-04 | |
| dielectric constant | IEC 60502 | 15000 Mohms·km | |
| IEC 60502 | 10000 Mohms·km | ||
| elongation | Break | IEC 60811 | 500 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top