PBT 420SEOM-1001 SABIC INNOVATIVE JAPAN

Form：Granules | Grade：Injection grade

Properties:

Glass fiber reinforceddimensional stability High rigidityhigh strengthheat-resisting

Typical Applications:

Lawn equipmentGarden equipmentIndustrial applicationsAutomotive External PartsElectrical fieldElectronic fieldArchitectural application fieldOutdoor applicationsElectrical appliancesEngine hood partsMedical suppliesNursing suppliesPlastic bagAutomotive interior partsCastersHousehold goodsPetroleum ApplicationsNatural gas suppliessporting goodsTextile applicationLighting applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:

Properties:

Glass fiber reinforced | dimensional stability | High rigidity | high strength | heat-resisting

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	6.0	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	7.0	kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	50	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	50	kJ/m²
Suspended wall beam without notch impact strength	23°C	ASTM D4812	620	J/m
	Suspended wall beam without notch impact strength	-30°C8	ISO 180/1U	45	kJ/m²
	Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	23°C8	ISO 180/1U	45	kJ/m²
Dart impact	23°C, Total Energy	ASTM D3763	5.00	J
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.40 mm	UL 94	V-2
	UL flame retardant rating	0.71 mm	UL 94	V-0
	UL flame retardant rating	UL flame retardant rating	2.0 mm	UL 94	5VA
Burning wire flammability index	1.0 mm	IEC 60695-2-12	960	°C
Extreme Oxygen Index		ISO 4589-2	32	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	--3	ASTM D638	12000	Mpa
Tensile modulus	Tensile modulus	--	ISO 527-2/1	10000	Mpa
tensile strength	Yield4	ASTM D638	120	Mpa
	tensile strength	Yield	ISO 527-2/5	120	Mpa
		tensile strength	Break4	ASTM D638	120	Mpa
		tensile strength	tensile strength	Break	ISO 527-2/5	120	Mpa
elongation	Yield4	ASTM D638	2.0	%
	elongation	Yield	ISO 527-2/5	1.9	%
		elongation	Break4	ASTM D638	2.0	%
		elongation	elongation	Break	ISO 527-2/5	1.9	%
Bending modulus	50.0 mm Span5	ASTM D790	9800	Mpa
Bending modulus	Bending modulus	--6	ISO 178	9500	Mpa
bending strength	--	ISO 178	180	Mpa
bending strength	bending strength	Break, 50.0 mm Span5	ASTM D790	186	Mpa
Taber abraser	1000 Cycles, 1000 g, CS-17 Wheel	Internal Method	22.0	mg
injection	Test Condition	Test Method	Test Result	Test Unit
drying temperature			120	°C
drying time			3.0 to 4.0	hr
Suggested maximum moisture content			0.020	%
Suggested injection volume			40 to 80	%
Temperature at the rear of the barrel			245 to 265	°C
Temperature in the middle of the barrel			250 to 270	°C
Temperature at the front of the material cylinder			255 to 275	°C
Spray nozzle temperature			250 to 270	°C
Processing (melt) temperature			255 to 275	°C
Mold temperature			65 to 90	°C
Back pressure			0.300 to 0.700	Mpa
Screw speed			50 to 80	rpm
Exhaust hole depth			0.025 to 0.038	mm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed, 3.20 mm	ASTM D648	212	°C
	Hot deformation temperature	0.45 MPa, Unannealed, 4.00 mm, 100 mm Span9	ISO 75-2/Be	220	°C
		Hot deformation temperature	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	200	°C
			Hot deformation temperature	1.8 MPa, Unannealed, 4.00 mm, 100 mm Span9	ISO 75-2/Ae	195	°C
			Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span8	ISO 75-2/Af	200	°C
Vicat softening temperature	--	ASTM D152510	200	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/A50	220	°C
Ball Pressure Test	123 to 127°C	IEC 60695-10-2	通过
Linear coefficient of thermal expansion	Flow : -40 to 40°C	ASTM E831	2.5E-5	cm/cm/°C
	Linear coefficient of thermal expansion	Flow : 23 to 80°C	ISO 11359-2	2.5E-5	cm/cm/°C
		Linear coefficient of thermal expansion	Across Flow : -40 to 40°C	ASTM E831	8.9E-5	cm/cm/°C
			Linear coefficient of thermal expansion	Across Flow : -40°C	ISO 11359-2	8.9E-5	cm/cm/°C
			Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow : 23 to 80°C	ISO 11359-2	1.2E-4	cm/cm/°C
thermal conductivity		ISO 8302	0.25	W/m/K
RTI Elec		UL 746	130	°C
RTI Imp		UL 746	130	°C
RTI		UL 746	140	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Specific volume		ASTM D792	0.610	cm³/g
melt mass-flow rate	250°C/5.0 kg	ASTM D1238	42	g/10 min
Melt Volume Flow Rate (MVR)	250°C/5.0 kg	ISO 1133	29.0	cm3/10min
Shrinkage rate	Flow 2	Internal Method	0.10 - 0.50	%
	Shrinkage rate	Flow : 3.20 mm	Internal Method	0.50 - 0.70	%
		Shrinkage rate	Across FlowFlow 2	Internal Method	0.40 - 0.80	%
		Shrinkage rate	Shrinkage rate	Across FlowFlow : 3.20 mm	Internal Method	0.50 - 1.0	%
Water absorption rate	Saturation, 23°C	ISO 62	0.090	%
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.070	%
Outdoor applicability		UL 746C	f2
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	> 1.0E+15	ohms
Volume resistivity		ASTM D257	> 1.0E+15	ohms·cm
Dielectric strength	1.60 mm, in Oil	ASTM D149	24	KV/mm
	Dielectric strength	3.20 mm, in Air	ASTM D149	19	KV/mm
		Dielectric strength	0.800 mm, in Oil	IEC 60243-1	23	KV/mm
			Dielectric strength	1.60 mm, in Oil	IEC 60243-1	22	KV/mm
			Dielectric strength	Dielectric strength	3.20 mm, in Oil	IEC 60243-1	16	KV/mm
Dielectric constant	100 Hz	ASTM D150	3.80
	Dielectric constant	1 MHz	ASTM D150	3.70
		Dielectric constant	50 Hz	IEC 60250	3.30
			Dielectric constant	60 Hz	IEC 60250	3.30
			Dielectric constant	Dielectric constant	1 MHz	IEC 60250	3.30
Dissipation factor	100 Hz	ASTM D150	2.0E-3
	Dissipation factor	1 MHz	ASTM D150	0.020
		Dissipation factor	50 Hz	IEC 60250	1.0E-3
			Dissipation factor	60 Hz	IEC 60250	1.0E-3
			Dissipation factor	Dissipation factor	1 MHz	IEC 60250	0.010
Arc resistance		ASTM D495	PLC 6
Compared to the anti leakage trace index		UL 746	PLC 3
High arc combustion index		UL 746	PLC 0
High voltage arc tracing rate		UL 746	PLC 4
Hot wire ignition		UL 746	PLC 2
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	119
Rockwell hardness	Rockwell hardness	R -Sale	ISO 2039-2	119
Ball Pressure Test	H 358/30	ISO 2039-1	118	Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top