PVC S-70 FPC NINGBO
157
- Properties:High transparencyThermal stability
- Usages:Special material for cast
Compare
View PricesTechnical Data Sheet
| 基本性能 | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 表观密度 | 优等品｜0.47-0.53 g/ml | ||
| 一等品｜0.47-0.53 g/ml | |||
| 合格品｜0.47-0.53 g/ml |
| 其他性能 | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 用途 | 硬质、半硬质产品，透明片材，板材、管件、注塑接头、阀、零件、容器等。 | ||
| 残留氯乙烯含量 | 一等品｜≤2 mg/kg | ||
| 合格品｜≤2 mg/kg | |||
| 100树脂的增塑剂吸收量 | 优等品｜≥29 g | ||
| 一等品｜≥29 g | |||
| 合格品｜≥29 g | |||
| 鱼眼 | 优等品｜≤20 个/400cm2 | ||
| 一等品｜≤40 个/400cm2 | |||
| 合格品｜≤90 个/400cm2 | |||
| 筛余物 | 0.063mm筛孔 | 优等品｜≥95 % | |
| 0.063mm筛孔 | 一等品｜≥95 % | ||
| 水萃取物电导率 | 优等品｜≤5 μs/cm·g | ||
| 一等品｜≤5 μs/cm·g | |||
| 合格品｜≤5 μs/cm·g | |||
| 筛余物 | 0.063mm筛孔 | 合格品｜≥90 % | |
| 挥发物含量 | 优等品｜≤0.30 % | ||
| 一等品｜≤0.30 % | |||
| 合格品｜≤0.30 % | |||
| 白度 | 160℃，10min后 | 优等品｜≥80 % | |
| 160℃，10min后 | 一等品｜≥80 % | ||
| 160℃，10min后 | 合格品｜≥78 % | ||
| 杂质粒子数 | 优等品｜≤16 个 | ||
| 一等品｜≤30 个 | |||
| 合格品｜≤80 个 | |||
| 筛余物 | 0.25mm筛孔 | 优等品｜≤1.0 % | |
| 0.25mm筛孔 | 一等品｜≤1.0 % | ||
| 0.25mm筛孔 | 合格品｜≤2.0 % | ||
| 残留氯乙烯含量 | 优等品｜≤2 mg/kg |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top