HDPE EL-Lene™ H655JA
0
- Usages:Shieldcasing
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD1505 | 0.958 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 0.40 g/10min | |
| Flow: | ASTMD955 | 3.6 % | |
| Lateral flow: | 内部方法 | 2.6 % | |
| Resistance to environmental stress cracking | ASTMD1693B | 400 hr |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD2240 | 66 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ASTMD638 | 27.5 MPa |
| Break | ASTMD638 | 34.3 MPa | |
| elongation | Break | ASTMD638 | 1000 % |
| Flexural modulus | ASTMD790 | 1180 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 98 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| brittle temperature | ASTMD746 | -60.0 °C | |
| vicat | ASTMD1525 | 128 °C | |
| melting temperature | ASTMD2117 | 131 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top