Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.60 g/cm³ |
| Shrinkage rate | | ASTMD955 | 0.40to0.90 % |
| Water absorption rate | Equilibrium | ASTMD570 | 0.70 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | R-Scale | ASTMD785 | 121 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-2 |
| UL flame retardant rating | | UL94 | V-2 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural Strength | | ASTMD790 | 196 MPa |
| tensile strength | | ASTMD638 | 127 MPa |
| elongation | | ASTMD638 | 4.0 % |
| Flexural modulus | | ASTMD790 | 8530 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 98 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTMD149 | 21 kV/mm |
| dielectric constant | | ASTMD150 | 3.80 |
| arc resistance | | ASTMD495 | 90.0 sec |
| CTI | | IEC60112 | 250 V |
| Volume resistivity | | ASTMD257 | 1E+15 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD3418 | 220 °C |
| | ASTMD648 | 210 °C |
| | ASTMD696 | 4.1E-05 cm/cm/°C |
| RTI Imp | | UL746 | 90.0 °C |
| RTI Imp | | UL746 | 90.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare