PC/ABS C2950-1001 SABIC INNOVATIVE JAPAN

Form：Granules | Grade：Injection grade

Properties:

Flame retardantHigh mobilityHigh impact resistanceHigh temperature resistanheat-resisting Flame retardant V0High temperature resistan

Typical Applications:

Electrical fieldElectronic fieldHousehold appliancesHousehold appliancesAutomotive sector

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical field \| Electronic field \| Household appliances \| Household appliances \| Automotive sector
Properties:	Flame retardant \| High mobility \| High impact resistance \| High temperature resistan \| heat-resisting \| Flame retardant V0 \| High temperature resistan

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23℃	ASTM D-256	533	J/m
Rockwell hardness		D785	123	R
Bending modulus		ASTM D-790	2653	Mpa
bending strength		ASTM D-790	102	Mpa
Elongation at Break	Break点	ASTM D-638	40	%
tensile strength	屈伏点	ASTM D-638	63	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8Mpa	ASTM D-648	95	°C
Long term use temperature	无冲击	UL -746B	85	°C
UL flame retardant rating		UL -94	V-0
Vicat softening temperature		ASTM D-1525	112	°C
Long term use temperature	含冲击	UL -746B	75	°C
Hot deformation temperature	0.45Mpa	ASTM D-648	104	°C
UL flame retardant rating		UL -94	1.6	mm
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	3.2mm	ASTM D-955	4-6	E-3
Water absorption rate		ASTM D-570	0.1	%
density		ASTM D-792	1.18
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D-257	1E+16	ohm-cm
Volume resistivity		ASTM D-150	1E+17	ohm-cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top