
PC DF-1004 SABIC INNOVATIVE US
47
Form:Granules | Grade:Enhanced level
Properties:
Easy to demouldEasy to form
Typical Applications:
Plastic bagElectrical appliances
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Plastic bag | Electrical appliances |
| Properties: | Easy to demould | Easy to form |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 59 | kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 8.5 | kJ/m² |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | Break | ASTM D638 | 91.7 | Mpa |
| Tensile modulus | ISO 527-2/1 | 5940 | Mpa | |
| ASTM D638 | 5520 | Mpa | ||
| bending strength | Break,50.0mmSpan | ASTM D790 | 148 | Mpa |
| Bending modulus | 50.0mmSpan | ASTM D790 | 5520 | Mpa |
| elongation | Break | ASTM D638 | 9.5 | % |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa,Unannealed,64.0mmSpan | ISO 75-2/Af | 141 | °C |
| 1.8MPa,Unannealed,3.20mm | ASTM D648 | 139 | °C | |
| 0.45MPa,Unannealed,3.20mm | ASTM D648 | 144 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 24hr,50%RH | ASTM D570 | 0.10 | % |
| Shrinkage rate | MD:24hr | ISO 294-4 | 0.20 | % |
| TD:24hr | ISO 294-4 | 0.45 | % | |
| TD:24hr | ASTM D955 | 0.50 | % | |
| MD:24hr | ASTM D955 | 0.20 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.