Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D1238 | 2.0 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 76 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Blow molding mold temperature | | | 20to40 °C |
| Blow molding temperature | | | 230to250 °C |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 75 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | Injection | ASTM D638 | 1100 MPa |
| tensile strength | | ASTM D638 | 30.0 MPa |
| elongation | | ASTM D638 | 26 % |
| Flexural modulus | Injection | ASTM D790 | 1000 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 80.0 °C |
| melting temperature | | ASTM D3418 | 145 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare