EHMWPE Quadrant EPP TIVAR® 1000 UV Stabilized Natural
0
- Properties:Mechanical properties
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| compressive strength | ASTM D695 | 20.7 MPa | |
| density | ASTM D792 | 0.930 g/cm³ | |
| Water absorption rate | ASTM D570 | <0.010 % | |
| shear strength | ASTM D732 | 33.1 MPa | |
| Water absorption rate | Saturation | ASTM D570 | <0.010 % |
| Shore hardness | ASTM D2240 | 66 | |
| Tensile modulus | ASTM D638 | 689 MPa | |
| coefficient of friction | Steel - Static | 内部方法 | 0.12 |
| Impact strength of cantilever beam gap | ASTM D256A | 无断裂 | |
| Heat distortion temperature | ASTM D648 | 46.7 °C | |
| Maximum operating temperature LongTerm, Air | 82 °C | ||
| Crystallization peak temperature | ASTM D3418 | 135 °C | |
| Linear coefficient of thermal expansion | ASTME831 | 3.6E-04 cm/cm/°C | |
| thermal conductivity | ASTMC177 | 0.41 W/m/K | |
| Surface Resistivity | ASTM D257 | >1.0E+15 ohms | |
| tensile strength | Ultimate | ASTM D638 | 40.0 MPa |
| elongation | Break | ASTM D638 | 300 % |
| Flexural modulus | ASTM D790 | 758 MPa | |
| bending strength | Yield | ASTM D790 | 24.1 MPa |
| Compression Modulus | ASTM D695 | 0.552 MPa | |
| dielectric strength | ASTM D149 | 91 kV/mm | |
| dielectric constant | ASTM D150 | 2.30 | |
| Dissipation Factor | ASTM D150 | 5E-04 | |
| UL flame retardant rating | UL 94 | HB | |
| limiting pv value | 内部方法 | 0.0701 MPa·m/s |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top