Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Fiberfil® PP-61/CC/20 Canada Fiberfil
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Canada Fiberfil/Fiberfil® PP-61/CC/20 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 48 J/m |
| hardness | Test Condition | Test Method | Canada Fiberfil/Fiberfil® PP-61/CC/20 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 75to85 |
| Mechanical properties | Test Condition | Test Method | Canada Fiberfil/Fiberfil® PP-61/CC/20 |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 29.0 MPa |
| tensile strength | 23°C | ASTM D638 | 23.4 MPa |
| Tensile modulus | 23°C | ASTM D638 | 1650 MPa |
| Flexural modulus | 23°C | ASTM D790 | 1520 MPa |
| elongation | 断裂,23°C | ASTM D638 | 50 % |
| physical property | Test Condition | Test Method | Canada Fiberfil/Fiberfil® PP-61/CC/20 |
|---|---|---|---|
| Shrinkage rate | MD：6.35mm | ASTM D955 | 1.4to1.6 % |
| Water absorption rate | 24hr | ASTM D570 | 0.10 % |
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 10to15 g/10min |
| density | ASTM D792 | 1.07 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 1.2to1.4 % |
| Thermal performance | Test Condition | Test Method | Canada Fiberfil/Fiberfil® PP-61/CC/20 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 60.0 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 102 °C |
Contact Us
Get App
Top