Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEEK TECAPEEK® CF30 ENSINGER GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ENSINGER GERMANY/TECAPEEK® CF30 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 48 J/m |
| Supplementary Information | Test Condition | Test Method | ENSINGER GERMANY/TECAPEEK® CF30 |
|---|---|---|---|
| limiting pv value | 20°C | 385000 psi·fpm |
| hardness | Test Condition | Test Method | ENSINGER GERMANY/TECAPEEK® CF30 |
|---|---|---|---|
| Rockwell hardness | M级 | ASTM D785 | 107 |
| Mechanical properties | Test Condition | Test Method | ENSINGER GERMANY/TECAPEEK® CF30 |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 318 MPa |
| compressive strength | 23°C | ASTM D695 | 240 MPa |
| Tensile modulus | 23°C | ASTM D638 | 13000 MPa |
| Flexural modulus | 23°C | ASTM D790 | 12800 MPa |
| coefficient of friction | 0.22 | ||
| shear strength | 23°C | ASTM D3846 | 97.2 MPa |
| tensile strength | 屈服,23°C | ASTM D638 | 186 MPa |
| elongation | 断裂,23°C | ASTM D638 | 1.1 % |
| flammability | Test Condition | Test Method | ENSINGER GERMANY/TECAPEEK® CF30 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |
| physical property | Test Condition | Test Method | ENSINGER GERMANY/TECAPEEK® CF30 |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.060 % |
| density | ASTM D792 | 1.41 g/cm³ |
| Thermal performance | Test Condition | Test Method | ENSINGER GERMANY/TECAPEEK® CF30 |
|---|---|---|---|
| thermal conductivity | ASTMC177 | 0.92 W/m/K | |
| Heat distortion temperature | 1.8MPa,未退火,6.35mm，HDT | ASTM D648 | 316 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 1.4E-05 cm/cm/°C |
| melting temperature | 334 °C | ||
| Continuous use temperature | 260 °C |
Contact Us
Get App
Top