Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
LCP A330S VF2001 JAPAN POLYPLASTIC
LAPEROS®
Automotive sector,Camera applications,Optical applications,Electronic field,Electrical field,Automotive Applications,Enterprise Equipment,Camera applications,Electrical/Electronic Applications,Optical applications
Antichemical,Thermal stability,high strength,wear resistant,Weather resistance,High rigidity,damping,Electrical insulation mat,Good chemical corrosion r,Good thermal stability,Good thermal stability,High traffic,Solvent resistant,Good wear resistance,high strength,Good weather resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/A330S VF2001 |
|---|---|---|---|
| Flexural modulus | 6.4mm | ASTM D790 | 14700 MPa |
| bending strength | 6.4mm | ASTM D790 | 215 MPa |
| tensile strength | 3.20mm | ASTM D638 | 205 MPa |
| Impact strength of cantilever beam gap | ASTM D256 | 58 J/m | |
| elongation at break | 3.20mm | ASTM D638 | 2.5 % |
| Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/A330S VF2001 |
|---|---|---|---|
| dielectric strength | 3.00mm | ASTM D149 | 24 kV/mm |
| dielectric constant | 1000Hz | ASTM D150 | 4.6 |
| Surface Resistivity | ASTM D257 | 8.1E+15 ohms | |
| Compared to the Leakage Tracking Index (CTI) | UL 746 | V | |
| Volume resistivity | ASTM D257 | 2E+16 Ohm.cm | |
| dielectric constant | 1E+6Hz | ASTM D150 | 0.027 |
| arc resistance | ASTM D495 | 124 sec |
| physical property | Test Condition | Test Method | JAPAN POLYPLASTIC/A330S VF2001 |
|---|---|---|---|
| Shrinkage rate | Across Flow | ASTM D955 | -0.05 % |
| Rockwell hardness | M-Scale | ASTM D785 | 72 |
| Shrinkage rate | Flow | ASTM D955 | 0.02 % |
| Thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/A330S VF2001 |
|---|---|---|---|
| UL flame retardant rating | 0.800mm | UL 94 | V-0 |
| Linear coefficient of thermal expansion | 50℃,3.00mm，流动 | ASTM D696 | 5E-06 cm/cm/℃ |
| 50℃,3.00mm，垂直 | ASTM D696 | 0.000062 cm/cm/℃ | |
| UL flame retardant rating | 0.400mm | UL 94 | V-0 |
| 1.60mm | UL 94 | V-0 | |
| Heat distortion temperature | 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 210 ℃ |
Contact Us
Get App
Top