Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 66IK4 NC DOMO CHEM GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodDOMO CHEM GERMANY/66IK4 NC
Impact strength of simply supported beam without notch-30°CISO 179/1eU无断裂
23°CISO 179/1eU无断裂
Suspended wall beam without notch impact strength23°CISO 180/1U无断裂
hardnessTest ConditionTest MethodDOMO CHEM GERMANY/66IK4 NC
Rockwell hardnessR 计秤ISO 2039-2110
Mechanical propertiesTest ConditionTest MethodDOMO CHEM GERMANY/66IK4 NC
Tensile modulusISO 527-2/11800 Mpa
tensile strength 屈服ISO 527-2/5045.0 Mpa
bending strengthISO 17865.0 Mpa
Flexural modulusISO 1781700 Mpa
Tensile strain断裂ISO 527-2/50> 50 %
Electrical performanceTest ConditionTest MethodDOMO CHEM GERMANY/66IK4 NC
Volume resistivityIEC 600931.0E+15 ohms·cm
Surface ResistivityIEC 600931.0E+13 ohms
flammabilityTest ConditionTest MethodDOMO CHEM GERMANY/66IK4 NC
burning rateFMVSS 302< 100 mm/min
UL flame retardant rating0.8 mmUL 94HB
ISO 9660ISO 1874PA66-I.M.14-020
physical property Test ConditionTest MethodDOMO CHEM GERMANY/66IK4 NC
Shrinkage rate流量 : 23°C, 72小时ISO 25771.4 - 1.6 %
viscosity number96% H2SO4ISO 307145 cm³/g
Shrinkage rate横向流量 : 23°C, 72小时ISO 25771.6 - 1.8 %
Thermal performanceTest ConditionTest MethodDOMO CHEM GERMANY/66IK4 NC
melting temperatureISO 11357-3262 °C
Heat distortion temperature0.45 MPa, 未退火，HDTISO 75-2/B160 °C
vicatISO 306/B50220 °C
Heat distortion temperature1.8 MPa, 未退火，HDTISO 75-2/A65.0 °C
injectionTest ConditionTest MethodDOMO CHEM GERMANY/66IK4 NC
drying time2.0 to 4.0 hr
Processing (melt) temperature270 to 290 °C
drying temperature75 to 85 °C
Temperature40 to 80 °C

Contact Us

Get App

Top