Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PP Mineralblend® PP-3850 Colour Image Plastic Compound Sdn. Bhd. (CIPC)
--
Electrical appliances and business equipment
Filler, calcium carbonate filler, 40%, filler by weight,
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | Colour Image Plastic Compound Sdn. Bhd. (CIPC)/Mineralblend® PP-3850 |
|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed,4.00mm | ASTM D648 | 112 °C |
| 1.8MPa,Unannealed,4.00mm | ASTM D648 | 72.0 °C |
| mechanical properties | Test Condition | Test Method | Colour Image Plastic Compound Sdn. Bhd. (CIPC)/Mineralblend® PP-3850 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 2700 MPa | |
| bending strength | ASTM D790 | 40.0 MPa | |
| elongation | Break | ASTM D638 | 15 % |
| tensile strength | ASTM D638 | 20.0 MPa |
| Physical properties | Test Condition | Test Method | Colour Image Plastic Compound Sdn. Bhd. (CIPC)/Mineralblend® PP-3850 |
|---|---|---|---|
| density | ASTM D792 | 1.25 g/cm³ | |
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 19 g/10min |
| Shrinkage rate | MD:3.20mm | ASTM D955 | 0.80to1.1 % |
| impact performance | Test Condition | Test Method | Colour Image Plastic Compound Sdn. Bhd. (CIPC)/Mineralblend® PP-3850 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 40 J/m |
| flammability | Test Condition | Test Method | Colour Image Plastic Compound Sdn. Bhd. (CIPC)/Mineralblend® PP-3850 |
|---|---|---|---|
| UL flame retardant rating | 1.60mm | UL 94 | HB |