Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS EM60 TYNE USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | TYNE USA/EM60 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 320 J/m |
| hardness | Test Condition | Test Method | TYNE USA/EM60 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 104 |
| Mechanical properties | Test Condition | Test Method | TYNE USA/EM60 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 320 J/m |
| elongation at yield | ASTM D638 | 50 % | |
| elongation | 屈服 | ASTM D638 | 50 % |
| Flexural modulus | ASTM D790 | 2000 MPa | |
| tensile strength | 断裂 | ASTM D638 | 49.0 MPa |
| Rockwell hardness | ASTM D785 | 104 R 计秤 | |
| bending strength | ASTM D790 | 57.9 MPa | |
| Fracture tensile strength | 断裂 | ASTM D638 | 49.0 MPa |
| flammability | Test Condition | Test Method | TYNE USA/EM60 |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | HB |
| 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | TYNE USA/EM60 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.70to0.90 % |
| density | ASTM D792 | 1.03 g/cm3 | |
| ASTM D792 | 1.03 g/cm³ |
| Thermal performance | Test Condition | Test Method | TYNE USA/EM60 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 85.0 °C |
| 1.8MPa,未退火，HDT | ASTM D648 | 85.0 ℃ | |
| UL flame retardant rating | 1.59mm | UL 94 | HB |
Contact Us
Get App
Top