Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TP, Unspecified R-4545/17 HAPCO USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | HAPCO USA/R-4545/17 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D256 | 46 J/m | |
| Impact strength of cantilever beam gap | ASTM D256 | 29 J/m |
| hardness | Test Condition | Test Method | HAPCO USA/R-4545/17 |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 80 |
| Electrical performance | Test Condition | Test Method | HAPCO USA/R-4545/17 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 7.3E+13 ohms·cm | |
| dielectric strength | ASTM D149 | 21 kV/mm | |
| Dissipation Factor | 25°C,100kHz | ASTM D150 | 0.012 |
| dielectric constant | 1kHz | ASTM D150 | 4.10 |
| 100kHz | ASTM D150 | 3.80 |
| Mechanical properties | Test Condition | Test Method | HAPCO USA/R-4545/17 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 15 % |
| tensile strength | ASTM D638 | 55.8 MPa | |
| Tensile modulus | ASTM D638 | 2530 MPa | |
| Flexural modulus | ASTM D790 | 2700 MPa | |
| bending strength | ASTM D790 | 66.9 MPa |
| thermosetting | Test Condition | Test Method | HAPCO USA/R-4545/17 |
|---|---|---|---|
| Thermosetting mixed viscosity | 25°C | ASTM D4878 | 550 cP |
| GelTime | 25°C | ASTM D2971 | 1.0 hr |
| Thermosetting components | 部件A | 按重量计算的混合比:100.按容量计算的混合比:100 | |
| 部件B | 按重量计算的混合比:42.按容量计算的混合比:50 | ||
| stripping time | 21°C | 1400 min |
| physical property | Test Condition | Test Method | HAPCO USA/R-4545/17 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D2566 | 0.050to0.25 % |
| density | ASTM D4669 | 1.07 g/cm³ | |
| Weight Percubicinch | 18 g |
| Thermal performance | Test Condition | Test Method | HAPCO USA/R-4545/17 |
|---|---|---|---|
| thermal conductivity | 0.22 W/m/K | ||
| Usage temperature | 63 °C |
Contact Us
Get App
Top