Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPA XT4 GF30 VOI NC CELANESE USA
--
--
enhance、Thermal stability
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | CELANESE USA/XT4 GF30 VOI NC |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | kJ/m² | 42 -- |
| 23°C | kJ/m² | 45 48 |
| Mechanical properties | Test Condition | Test Method | CELANESE USA/XT4 GF30 VOI NC |
|---|---|---|---|
| tensile strength | 屈服,23°C | MPa | 150 145 |
| Tensile modulus | 23°C | 12000 MPa | |
| Tensile strain | 断裂,23°C | % | 2.2 2.5 |
| Electrical performance | Test Condition | Test Method | CELANESE USA/XT4 GF30 VOI NC |
|---|---|---|---|
| Volume resistivity | 23°C | ohms·cm | 1E+12 -- |
| Compared to the Leakage Tracking Index (CTI) | 3.20mm,解决方案A | V | PLC 0 |
| dielectric strength | 2.00mm | kV/mm | 35 -- |
| Surface Resistivity | ohms | 1E+11 -- |
| flammability | Test Condition | Test Method | CELANESE USA/XT4 GF30 VOI NC |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | V-0 -- | |
| Burning wire flammability index | 0.8mm | °C | 960 -- |
| UL flame retardant rating | 0.8mm | V-0 -- | |
| Burning wire flammability index | 3.2mm | °C | 960 -- |
| UL flame retardant rating | 1.6mm | V-0 -- | |
| Hot filament ignition temperature | 0.8mm | °C | 800 -- |
| UL flame retardant rating | 0.40mm | V-0 -- | |
| Hot filament ignition temperature | 3.2mm | °C | 875 -- |
| physical property | Test Condition | Test Method | CELANESE USA/XT4 GF30 VOI NC |
|---|---|---|---|
| Shrinkage rate | MD:23°C | % | 0.20 -- |
| Water absorption rate | 饱和,23°C | % | 0.30 -- |
| Shrinkage rate | TD:23°C | % | 0.90 -- |
| Water absorption rate | 23°C,24hr | % | 3.0 -- |
| Thermal performance | Test Condition | Test Method | CELANESE USA/XT4 GF30 VOI NC |
|---|---|---|---|
| Continuous use temperature | °C | 140 -- | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | °C | 280 -- |
Contact Us
Get App
Top