Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

ABS H605 INEOS USA
Novodur®
Automotive sector,Application in the automotive field,Automotive interior equipment
heat-resisting
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | INEOS USA/H605 |
|---|---|---|---|
| Ball Pressure Test | ISO 2039-1 | 105 Mpa |
| thermal performance | Test Condition | Test Method | INEOS USA/H605 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Annealed | ISO 75-2/A | 98.0 °C |
| 0.45MPa,Annealed | ISO 75-2/B | 102 °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 8E-05 cm/cm/°C |
| Vicat softening temperature | ISO 306/B50 | 101 °C |
| mechanical properties | Test Condition | Test Method | INEOS USA/H605 |
|---|---|---|---|
| Bending modulus | ISO 178 | 2400 Mpa | |
| bending strength | ISO 178 | 72.0 Mpa | |
| Tensile modulus | ISO 527-2 | 2400 Mpa | |
| Tensile strain | Yield,23°C | ISO 527-2 | 2.5 % |
| Break,23°C | ISO 527-2 | >15 % | |
| tensile strength | Yield,23°C | ISO 527-2 | 47.0 Mpa |
| Electrical performance | Test Condition | Test Method | INEOS USA/H605 |
|---|---|---|---|
| Compared to the anti leakage trace index | IEC 60112 | V | |
| Dielectric strength | 1.50mm | IEC 60243-1 | 33 KV/mm |
| Dissipation factor | 1MHz | IEC 60250 | 8E-03 |
| 100Hz | IEC 60250 | 5E-03 | |
| Relative permittivity | 100Hz | IEC 60250 | 3.10 |
| 1MHz | IEC 60250 | 3.00 |
| Physical properties | Test Condition | Test Method | INEOS USA/H605 |
|---|---|---|---|
| density | ISO 1183 | 1.05 g/cm³ | |
| Melt Volume Flow Rate (MVR) | 220°C/10.0kg | ISO 1133 | 25.0 cm3/10min |
| Shrinkage rate | ISO 294-4 | 0.40-0.60 % |
| impact performance | Test Condition | Test Method | INEOS USA/H605 |
|---|---|---|---|
| Charpy Notched Impact Strength | -30°C | ISO 179 | 7.0 kJ/m² |
| 23°C | ISO 179 | 17 kJ/m² | |
| Impact strength of cantilever beam gap | -30°C | ISO 180/A | 7.0 kJ/m² |
| 23°C | ISO 180/A | 17 kJ/m² | |
| Impact strength of simply supported beam without notch | -30°C | ISO 179 | 80 kJ/m² |
| 23°C | ISO 179 | 90 kJ/m² |