Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/PTFE DL4040 SABIC INNOVATIVE US
LNP™ LUBRICOMP™
Sports equipment、Electronic and electrical、Automotive components
Thermal stability、High temperature resistan
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/DL4040 |
|---|---|---|---|
| Suspended wall beam notch impact strength 6 | 23°C | ISO180/1A | 12 kJ/m² |
| Multi axis Instrumented Impact Energy | ISO6603-2 | 21.1 J | |
| Unscented Izod Impact Strength 5 | 23°C | ISO180/1U | 180 kJ/m² |
| Dart impact equipped with measuring instruments | 23°C,TotalEnergy | ASTMD3763 | 24.8 J |
| 23°C,EnergyatPeakLoad | ASTMD3763 | 24.8 J |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/DL4040 |
|---|---|---|---|
| Tensile stress | 断裂 | ISO527-2/5 | 39.0 Mpa |
| elongation | 断裂 | ASTMD638 | 29 % |
| Tensile strain | 断裂 | ISO527-2/5 | 29 % |
| Bending stress | ISO178 | 63.0 Mpa | |
| Dynamic | ASTMD3702Modified | 0.25 | |
| Tensile modulus | ASTMD638 | 2080 Mpa | |
| bending strength | ASTMD790 | 73.8 Mpa | |
| Static | ASTMD3702Modified | 0.21 | |
| Tensile stress | 屈服 | ISO527-2/5 | 44.0 Mpa |
| elongation | 屈服 | ASTMD638 | 6.2 % |
| Tensile modulus | ISO527-2/1 | 2050 Mpa | |
| tensile strength | 屈服 | ASTMD638 | 43.0 Mpa |
| Tensile strain | 屈服 | ISO527-2/5 | 5.9 % |
| tensile strength | 断裂 | ASTMD638 | 39.0 Mpa |
| Flexural modulus | ISO178 | 1930 Mpa | |
| Wear factor - Washer | ASTMD3702Modified | 7.50 10^-10in^5-min/ft-lb-hr | |
| Flexural modulus | 50.0mm跨距 | ASTMD790 | 2060 Mpa |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/DL4040 |
|---|---|---|---|
| Shrinkage rate | TD：24hr | ASTMD955 | 0.60to0.80 % |
| Water absorption rate | 平衡,23°C,50%RH | ISO62 | 0.36 % |
| Shrinkage rate | MD:24小时 | ISO294-4 | 0.59 % |
| TD:24小时 | ISO294-4 | 0.64 % | |
| Water absorption rate | 24hr,50%RH | ASTMD570 | 0.25 % |
| Shrinkage rate | MD：24小时 | ASTMD955 | 0.50to0.70 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/DL4040 |
|---|---|---|---|
| Hot deformation temperature 7 | 0.45MPa,Unannealed,64.0mmSpan | ISO75-2/Bf | 143 °C |
| 1.8MPa,未退火,3.20mm | ASTMD648 | 128 °C | |
| MD：-40到40°C | ISO11359-2 | 7.7E-05 cm/cm/°C | |
| TD：-40到40°C | ISO11359-2 | 7.6E-05 cm/cm/°C | |
| MD：-40到40°C | ASTME831 | 7.7E-05 cm/cm/°C | |
| Hot deformation temperature 7 | 1.8MPa,未退火,64.0mm跨距 | ISO75-2/Af | 129 °C |
| 0.45MPa,未退火,3.20mm | ASTMD648 | 141 °C | |
| TD：-40到40°C | ASTME831 | 7.6E-05 cm/cm/°C |
Contact Us
Get App
Top