Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Polyester, TS Glastic® UTS 1478 Glastic Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | Glastic Corporation/Glastic® UTS 1478 |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD:1.60mm | ASTM D696 | 2E-05 cm/cm/°C |
| RTI | 1.6mm | UL 746 | 160 °C |
| RTI Elec | 1.6mm | UL 746 | 130 °C |
| thermal conductivity | ASTMC177 | 0.26 W/m/K |
| mechanical properties | Test Condition | Test Method | Glastic Corporation/Glastic® UTS 1478 |
|---|---|---|---|
| bending strength | Yield,1.60mm | ASTM D790 | 170 MPa |
| compressive strength | 1.60mm | ASTM D695 | 269 MPa |
| shear strength | ASTM D732 | 92.4 MPa | |
| tensile strength | Yield,1.60mm | ASTM D638 | 61.4 MPa |
| Electrical performance | Test Condition | Test Method | Glastic Corporation/Glastic® UTS 1478 |
|---|---|---|---|
| Arc resistance | 1.60mm | ASTM D495 | 130 sec |
| Compared to the anti leakage trace index | 1.60mm | UL 746 | PLC 1 |
| Dielectric strength | 1.60mm,inAir | ASTM D149 | 17 kV/mm |
| 1.60mm,inOil | ASTM D149 | 22 kV/mm | |
| Dissipation factor | 1.60mm,60Hz | ASTM D150 | 0.011 |
| 1.60mm,1MHz | ASTM D150 | 0.010 | |
| High arc combustion index | 1.60mm | UL 746 | PLC 0 |
| Hot wire ignition | 1.60mm | UL 746 | PLC 0 sec |
| Physical properties | Test Condition | Test Method | Glastic Corporation/Glastic® UTS 1478 |
|---|---|---|---|
| density | ASTM D792 | 1.80 g/cm³ | |
| Water absorption rate | 24hr | ASTM D570 | 0.60 % |
| impact performance | Test Condition | Test Method | Glastic Corporation/Glastic® UTS 1478 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 1.60mm | ASTM D256 | 570 J/m |
| flammability | Test Condition | Test Method | Glastic Corporation/Glastic® UTS 1478 |
|---|---|---|---|
| Extreme Oxygen Index | 1.60mm | ASTM D2863 | 36 % |
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |