Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
AS(SAN) Jamplast JPSANGI Jamplast, Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodJamplast, Inc./Jamplast JPSANGI
Impact strength of cantilever beam gap23°C,3.18mmASTM D25616 J/m
hardnessTest ConditionTest MethodJamplast, Inc./Jamplast JPSANGI
Rockwell hardnessR级ASTM D785125
Mechanical propertiesTest ConditionTest MethodJamplast, Inc./Jamplast JPSANGI
elongation断裂,3.18mmASTM D6382.5 %
Flexural modulus3.18mmASTM D7903870 MPa
Tensile modulus3.18mmASTM D6383470 MPa
tensile strength 屈服,3.18mmASTM D63871.7 MPa
bending strength屈服,3.18mmASTM D790123 MPa
tensile strength 断裂,3.18mmASTM D63871.7 MPa
optical performance Test ConditionTest MethodJamplast, Inc./Jamplast JPSANGI
transmissivityASTM D100389.0 %
Haze ratioASTM D10030.60 %
flammabilityTest ConditionTest MethodJamplast, Inc./Jamplast JPSANGI
UL flame retardant ratingUL 94HB
Limiting Oxygen IndexASTM D286319 %
physical property Test ConditionTest MethodJamplast, Inc./Jamplast JPSANGI
Shrinkage rateMDASTM D9550.30to0.70 %
melt mass-flow rate230°C/3.8kgASTM D12388.0 g/10min
densityASTM D7921.07 g/cm³
Thermal performanceTest ConditionTest MethodJamplast, Inc./Jamplast JPSANGI
vicatASTM D1525108 °C
Heat distortion temperature0.45MPa,退火,3.18mm，HDTASTM D648102 °C
0.45MPa,未退火,3.18mm，HDTASTM D64896.7 °C
1.8MPa,未退火,3.18mm，HDTASTM D64885.6 °C
Linear coefficient of thermal expansionMDASTM D6965.9E-05 cm/cm/°C
Heat distortion temperature1.8MPa,退火,3.18mm，HDTASTM D64898.3 °C

Contact Us

Get App

Top